Tips for choosing a trolley case

When buying a travel suitcase, consumers should first check the appearance of the case, that is, whether the case is round and the corners are symmetrical. The case can be placed upright or upside down on the ground to check whether the four feet of the case are on the ground and not skewed, and whether the surface of the case is flat, with no scratches or cracks. Pay special attention to the symmetry of the four corners of the case shell (top and bottom).

Secondly, open the case and check the opening of the case. The openings of the case should match each other, the gap should be small, the seams should be closed, the hinges should rotate flexibly, without obstruction, the buckle should be closed, buckled, and opened, the box should be firmly adhered, and the textile fabric should not have skipped threads or cracked pieces.

Then the handle (mop) should be installed firmly and should not be loose. The pull rod should be flexible and have a certain strength. The telescopic rod and the fixed rod should be properly matched, and the expansion should not be too large. After the locking button of the pull rod is pressed, the pull rod should be able to be smoothly extended and retracted. The box running wheel should rotate flexibly, and it is best to use a running wheel with bearings.

When checking the lock, you can randomly combine several sets of digital numbers for testing, and open and close normally.

Our company's trolley cases can solve some of the above-mentioned problems very well, and the quality is very good. Welcome to learn about and buy!